Nice, Slammed, eXtreme? (photo courtesy: www.nsxprime.com)
Casey writes:
Hello Sajeev,
I had a coworker who had an older Acura NSX that was lowered. He complained about having to buy new tires because they were worn on the inside edge (down to the belts!). He had, what I thought to be, extreme negative camber due to an improper lowering. He said it was supposed to be like that. I have seen other cars running the negative camber and I've seen cars that were lowered without. So question, is there a reason to run extreme negative camber or is this just a bad lowering job?
Sajeev answers:
I agree with your assessment. Very few, if any, performance cars come from the factory aligned aggressively enough to wear tires that unevenly. I reckon that NSX was lowered, tweaked to reflect well upon the Stancenation. To live the Hellaflush lifestyle! To embrace the image of performance, without necessarily improving actual performance.
No seriously, facades are awesome like that. Because I'd be a hypocrite if I said otherwise.
New Cadillacs and Lincolns = Cooler in Houston
Now to make inferences, and foolishly justify them.
There's always a reason for this: a subtle lowering can improve performance and stance at the same time. On an NSX? Probably not, since it isn't a buffalo-butted, blunt nosed family sedan jacked up to the sky by the factory. I reckon the fastest NSX on a less-than-perfect track has the factory ride height with a slightly more aggressive wheel alignment. A hellaflush NSX will lose…if that was the point.
It's totally not the point. We all have a need to look cool, even those who claim otherwise in the comments section below. To wit, I put 1.5″ front lowering springs (factory spring rate) from these guys on my Fox Cougar to both look cool with my 17×8.5″ reproduction Cobra wheels and retain factory-like ride/handling traits. The rears have a small (1/8″) spacer because of the mishmash between wheel offset and new axles from a rear disc brake conversion. All this effort for a modest lowering job is important on a suspension as half-baked as a Fox body Ford.
I avoided the "improper" or "bad lowering job" you mentioned. Well, at least I think so.
Some folks think more aggressive suspension and wheel/tire modifications add extra cool factor to their lives. Perhaps I might be one of them, even if I bristle at the sight of most Hellaflush rides. But Hellaflush riders certainly don't give a shit about what you or I think.
So let your coworker buddy enjoy his cool looking NSX. If you can't resist the urge to twist the knife, take him to a track day and let serious racers give him an education that he might deserve. Or not.
Send your queries to sajeev@thetruthaboutcars.com. Spare no details and ask for a speedy resolution if you're in a hurry…but be realistic, and use your make/model specific forums instead of TTAC for more timely advice.
The post Piston Slap: What's so Hellabad about Hellaflush? appeared first on The Truth About Cars.
from The Truth About Cars http://ift.tt/Jh8LjA
Put the internet to work for you.
No comments:
Post a Comment